Results 1 to 10 of 23
Thread: Hot end Prusia i3
Threaded View
-
03-22-2014, 05:44 PM #11
Is the liner only in the J Head 1.75mm unit of is it also in the 3mm Hot Ends? I cleaned my 3mm hot end out a couple of months ago and do not remember any liner? If so, do all 1.75 J Heads have the liner or are some just drilled to ~1.75mm and do not need the liner?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help