Results 1 to 1 of 1
Threaded View
-
11-21-2016, 12:17 PM #1
- Join Date
- Jun 2015
- Posts
- 9
Scale Factor when using MakeBot Software
I haven't used MakerBot software in awhile and wanted to try it with my PowerSpec but I recall that MakerBot printers had a different gear ratio so scaling a object was necessary to make sure it was 100% of the original design. My recollection was that something sliced using MakerBot was about 94% of the original. Does anyone know what the scale factor is?
Thanks,
Jamie Bresner
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help