Hmm, ambient here is~25C-26C and ~42% humidity. I have been running the bed at 95C. After about 20min the interior temp usually can get up to about 32C and the humidity drops to ~30-34%. I've not noticed the temp climbing past ~32C and I am wondering what's different. Why does your setup warm up so? Ideas?
I do run a bed preheat a few times and let it run until it times out. I also tape up the slit in the back of the top to slow heat loss there. I seem to be able to get about sustained 45c at the back, lower left corner of the machine which is where my thermometer is.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help