Results 1 to 6 of 6
Threaded View
-
10-30-2016, 10:31 PM #1
- Join Date
- Oct 2016
- Posts
- 19
Second print not at Z=0 Geeetech Prusa i3 M201
Hi All.
The base of my first print didnt stick on one corner, so I cancelled it. I then reset the Z calibration carefully using 4 different points on the bed, However, now when i start the print job it only gets to within 2-3mm of the bed. If I then re-check the Z start position it returns to the correct position. Can anyone help?
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help