Results 1 to 10 of 19
Thread: good scanning on a printer
Threaded View
-
10-29-2016, 02:47 AM #1
- Join Date
- Oct 2016
- Posts
- 7
good scanning on a printer
According to the coder this was done on a 0.1 mm grid, and could be taken to a 0.05mm grid with half steps. It seems to work reasonably well as a scanner, but what do you guys think?
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)