Results 1 to 6 of 6
-
08-24-2015, 08:44 AM #1
Modeling a simple part in FreeCAD
-
11-02-2015, 08:57 AM #2
Tried it, didn't work for me
I Tried it but are more a fan from Blender
I can do almost anything with it.
-
11-13-2015, 11:13 PM #3
- Join Date
- Sep 2015
- Posts
- 1
-
11-24-2015, 03:08 PM #4
- Join Date
- Nov 2015
- Posts
- 2
will this part actually print out to be 20mm? I've taken STL files an imported them into CURA only to have them import super huge and had to be scaled down within ..... If I use freecad will that part keep it's dimensions when I slice and print?
-
11-24-2015, 05:57 PM #5
Great going, Davo! Keep it up! Can't wait to see the finish product and hopefully you'll have your model printed physically!
-
11-25-2015, 06:21 AM #6
I find that ABS shrinks about 1% after it has printed, so I scaled it to 1.01 in Repetrel, and it printed at 20mm on a side.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help