Results 1 to 2 of 2
-
08-17-2015, 02:08 AM #1
- Join Date
- Jul 2015
- Posts
- 8
First trial of ABS 3D printing- silicon bumper mold
This was my first work on ABS printing, I used spray for adhesion, maybe the size is small, spray worked well. Considering to get some acetone for surface treatment.
IMG_20150817_142451.jpgIMG_20150817_145958.jpgIMG_20150817_142607.jpg
-
08-17-2015, 06:42 AM #2
nice little mould.
Well if what you did worked - stick with it. Why change a system that works ?
And even on an abs part like that I'd expect warp at the corners. So you've got very good adhesion.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help