Close



Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1

    Soldering PLA together? Will it work?

    I know this is a rather crazy question. However, has anyone ever tried to solder to 3D Printed items (PLA) together using a soldering iron? Would it work? I know there are times when we want to print something large that won't fit in my build volume. Also times when we rather just print smaller parts. Could this work, if done correctly?

  2. #2
    Student
    Join Date
    Feb 2014
    Location
    GERMANY
    Posts
    16
    I tried it. It is possible, but difficult to make a reliable connection. You can coat the melted pla from one piece to the other. I would say, try it yourself

  3. #3
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    Welding plastic works fine, you just need a steady hand and a gentle touch.

    Old school fused deposition.

  4. #4
    Super Moderator
    Join Date
    Sep 2013
    Location
    Saskatchewan, Canada
    Posts
    294
    You fused it together to start with, so there's no reason why you can't do it again. Only issue is getting the entire surface of both parts to the right temperature uniformly.

    Or you can run a bead like this guy does.

    Alternatively, use some solvent cement.

  5. #5
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    yes plastic welding is done every day. there are a few types of welders. the cheapest is no more than a soldering iron with a temp controller on it. others use hot air some use nitrogen.

  6. #6
    This is also a method that can work on getting rid of the print lines that show up from the layering of PLA. I've tried it but it takes a lot of time and skill.

  7. #7
    Technologist
    Join Date
    Dec 2013
    Location
    Lincoln, Uk
    Posts
    100
    Add Chayat on Shapeways
    I've put motorcycle fairings back together after a fall by welding the back face with a soldering iron. Not sure what kind of plastic they were.

  8. #8
    Engineer
    Join Date
    Oct 2013
    Location
    new jersey
    Posts
    752
    chayat, most side fairings are a nylon and abs mix except yamaha which is polypropylene. the rest of the fairings are abs. i work on sportbike bodywork everyday that how i know but yes you can plastic weld them back together no problem. the only issue with a soldering iron is the temp is completely uncontrolled and or way too high for plastic so 90% of the time the plastic is cooked from the heat and its half broken down, charred or boiled making bubbles which results in a weak weld. its really not much different than welding metal. for a strong weld its experience and having the right tools for the job.

  9. #9
    Technician
    Join Date
    Nov 2013
    Location
    Toronto, Ohio
    Posts
    63
    Add kennycoulter on Facebook Add kennycoulter on Google+
    all good info. IU was confused before opening and reading, and was also going to suggest krazy glue. I am still new to printing, and don't get to mess too much, but I finished a recent failed print by gluing a few extra layers.

  10. #10
    Student
    Join Date
    Feb 2014
    Location
    Providence
    Posts
    15
    yeah, Like kenny said, if you're in a pinch, superglue definitely does the trick, but everybody else says its doable. Best of luck with it, also show images when done?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •