Results 1 to 3 of 3
-
06-29-2015, 01:25 AM #1
- Join Date
- Jun 2015
- Posts
- 2
Need Help with Model/Printing Error
I'm using my friend's 3D printer for a little project, but keep encountering an error when printing, and would appreciate any insight or assistance in determining and fixing the problem.
ECigBoxPicture.jpg
This is an incomplete print, as we saw the error appear. Notice how the outer wall ends, but on the other side of the slit continues as it should.
ECigBoxModelScreenshot.jpg
As the model shows, the walls should be the same height.
I use Blender to model and export to STL. I'm not sure what slicing program or printer is being used, but can find out if that's relevant. Any help is appreciated.
-
06-29-2015, 02:30 AM #2
Every slicer has a preview mode that allows you to see your model being built. You can spot that kind of major issues that way before starting a print.
I would suggest to get a good look at your model as it probably comes from there and then the slicing operation.
Probably not the printer or you wouldn't have such a clean fail.
-
06-29-2015, 02:50 PM #3
- Join Date
- Jun 2015
- Posts
- 2
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help