Results 1 to 6 of 6
-
04-08-2015, 02:43 PM #1
Polypropylene and Polycarbonate Prints
The polypropylene (black) was printed at 220C. The polycarbonate (blue) was printed at 350C. Yes, 350C, with the new MK1-350 head.
-
04-08-2015, 02:44 PM #2
Still dialing in the material, obviously, but not a bad first attempt at either, I think.
-
05-29-2015, 08:00 AM #3
Where did you get PP filament? I have been dying to try some but was told it doesn't exist due to layer adhesion issues...
-
05-29-2015, 11:51 AM #4
Sebastian,
I don't know where we got ours, but I was able to search and find three suppliers in about 90 seconds:
http://www.pla3dprinterfilament.com/...inter-filament
http://3dfilamenta.com/3d-printer-fi...nt-yellow.html
http://gizmodorks.com/polypropylene-...nter-filament/
The layers do not appear to have any adhesion issues. I flex this thing all the time to show people during skype sessions.
-
06-02-2015, 03:19 PM #5
so what advantages/disadvantages do the two materials have ?
-
06-22-2015, 07:19 AM #6
PP is very flexible, but not very compressible - it bends (less bendy than ninjaflex) but doesn't smoosh (less smooshy than ninjaflex). And it has a stronger force than ninjaflex to return to its original configuration.
Below are some results from this weekend's testing of the MK1-350, dialing in PC temps between 305 and 325:
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help