Results 1 to 3 of 3
-
05-04-2015, 11:08 PM #1
- Join Date
- May 2015
- Posts
- 1
New Print Layer start/end location?
I have a flashforge creator pro with sailfish replicatorg. I'll print something and for each shell layer, it will start and stop at the same location. The end result is that I get a noticeable and unattractive line on the part. It doesn't even seem to be totally consistent. 1/2" of building along the z axis later it could change within that print. What causes this? Is it in the code somewhere or just my printer's behavior. And is it something I can change (can I move this starting point of each layer off to another side)?
-
05-04-2015, 11:24 PM #2
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Start and stop point of each layer is controlled by the slicer. Most slicers have a setting to make it random if you choose to.
-
05-05-2015, 10:29 AM #3
not repg or makerware (as far as I know).
simplify3d does.
It's particularly noticeable in cylinders.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help