Results 1 to 4 of 4
Thread: My own 3D Scanner.
-
04-21-2015, 08:43 PM #1
- Join Date
- Jun 2014
- Location
- New York
- Posts
- 66
My own 3D Scanner.
I built this scanner while borrowing from the BQ scanner and Atlas 3D scanner. This thing is using FREELSS..... Not a bad outcome so far.
The details are as follows.
~150USD invested
Raspberry pi 2 + camera + an IC and a stepper driver. Add in a nema 17 stepper and one giant bearing. Some miscaleneous fasteners + some harbo freight laser lines.
This is my blog entry on the matter. http://engineerd3d.ddns.net/3d-laser...-me-up-scotty/
This is my youtube video.
-
04-22-2015, 07:06 AM #2
very neat got any printed copies and originals to compare ?
-
04-22-2015, 10:07 AM #3
- Join Date
- Jun 2014
- Location
- New York
- Posts
- 66
-
05-21-2015, 08:45 PM #4
- Join Date
- May 2015
- Posts
- 1
Great DIY!
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help