Results 1 to 3 of 3
-
01-05-2014, 12:25 PM #1
- Join Date
- Jan 2014
- Location
- Illinois
- Posts
- 14
Anybody have Solidworks that can assist me with this?
I am wanting to print this golf tee for a friend and print his name on each side of it. I seem to need something like Solidworks to make this happen, but I do not have that software package. Can anybody do this for me relatively easy or recommend a shareware/freeware design package that can do the trick?
http://www.thingiverse.com/thing:138144
The name that I am trying to add to both sides of the tee is, Jimmy Phillips.
-
01-20-2014, 08:01 PM #2
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
i have to agree on both counts. just make a new tee. you can do it about 5 min. as for the lettering though, thats some tiny stuff. there is no way any of our fdm printer will ever print letters that small and be clean and readable. the shaft of a tee is only about 1/8" diameter so your lettering will need to be slightly less that that
-
01-21-2014, 09:37 AM #3
- Join Date
- Jan 2014
- Location
- Illinois
- Posts
- 14
Thanks for your recommendations. I will take a crack at remodeling the Tee in a more 3D printer package and adding the lettering that way. Thats the for the tips!!
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help