Results 1 to 2 of 2
Thread: Repsnapper being stupid
-
01-13-2015, 10:38 AM #1
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Repsnapper being stupid
I thought I would try Repsnapper but am stuck. I have set both extruders in the settings but the gcode that is generated makes no sense. I set the T0 temperature in the start gcode then Repsnapper puts an "M6 T1" command in the gcode which is pretty stupid as it hasn't set a temperature for T1 so when it starts printing it just sits clicking on the T1 extruder.
I can't find anywhere to change this behaviour but it must be somewhere.
-
01-28-2015, 08:53 AM #2
- Join Date
- Jan 2015
- Posts
- 4
Try modifying the g-code after it is generated so that you know that it is not being modified and see if it works.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery