Results 1 to 1 of 1
-
05-10-2022, 05:06 AM #1
- Join Date
- May 2022
- Posts
- 1
SLA Printing layer adhesion issue
Hello all,All was going pretty fine with my prints until I changed the FEP film (original spare part).The first layers started to stop adhering one to another, so I get only 2 thin parts, one stuck to the metallic plate (see photo), one to the film.On the photo, only the part on the left were correctly printed (out of 4 objects on that print).Any idea? Context:* Printer: Phrozen Sonic Mega 8K* Resin: Resione K* Slicer: Chitubox (parameters attached)
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion