Results 1 to 6 of 6
-
03-28-2021, 08:13 PM #1
- Join Date
- Mar 2021
- Posts
- 3
Anyone know what is causing my prints to come out like this ??
Hi all,I am a newbie to 3d printing and so far I am liking it, I have a longer Lk5 pro, I am using white OVERTURE PLA Filament 1.75mm, printing at 210 with a 70 bed temp,I've tried to print this thing a couple of times and I am getting the same problem ( see pics)Thanks
-
03-29-2021, 02:53 PM #2
-
03-29-2021, 03:53 PM #3
where did you get the file from ?
Also looks like you are not printing enough top layers.
Although I've had similiar prints where the original stl file is at fault
-
03-29-2021, 05:03 PM #4
- Join Date
- Mar 2021
- Posts
- 3
-
03-31-2021, 06:05 AM #5
Also remmber that the thickness of the top is the number of top layers multiplied by the layer height.
So 0.3mm layer height x 3 layers = 0.9mm thickness
0.1mm x 3 layers - 0.3mm thickness.
Everytime you chage the printing layer height, remember to also increase or decrease the numbers of top and bottom layers.
-
04-10-2021, 12:46 PM #6
- Join Date
- Apr 2021
- Posts
- 1
Thanks for this, never thought it had effect.
https://minotaurfightstore.co.uk/men...boxing-shorts/ | https://minotaurfightstore.co.uk/men.../fight-shorts/Last edited by OttoGabriel; 08-31-2021 at 04:16 PM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help