Results 1 to 4 of 4
Thread: Need Help Printing this thing
-
12-14-2020, 12:01 PM #1
- Join Date
- Jul 2018
- Posts
- 34
Need Help Printing this thing
Hello all I am trying to print this skeleton from a swamp thing statue and I just cannot get it to print properly. It will fail on the foot or the arm. Its an odd shape and I hope someone will have some advise on how to get it to print properly. Here is the link to the print. My printer prints fairly well and its not my print settings just how this thing is shapped i think so any recommentations on how to position it or maybe on support or infill options would be appreciated. Thank you.
https://cults3d.com/en/3d-model/art/...g-gantawonder1
-
12-14-2020, 04:06 PM #2
- Join Date
- Jun 2020
- Location
- South Carolina
- Posts
- 55
Sorry I don't have any advice, but thanks for the link - cool website - I'm always looking for new models to print
-
12-15-2020, 10:47 AM #3
- Join Date
- May 2018
- Posts
- 566
you will need supports.. things can not print in mid air.. And I would expect it not to print very well in a FFF printer, maybe a resin printer. I can not download the model at this time but will try later and see what it looks like in S3d preview
-
12-15-2020, 05:40 PM #4
You can try to separate/cut the figures into better manageable parts, print them an glue.
curious aardvarkDual Extruder with soluble support filament.Last edited by Roberts_Clif; 12-16-2020 at 06:28 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help