Results 1 to 1 of 1
-
08-27-2020, 07:12 PM #1
- Join Date
- Aug 2020
- Posts
- 1
Flashforge Inventor 2 levelling DIstance To Big
I have a new Flashforge Inventor 2. I calibrated the extruder. Then went to the levelling option.
On the first calibration, I get an error message that the "distance is too big". When I adjust the knob, it runs out of adjustment while still being too far from the sensor.
I have 2 printers, and this is only happening on one.
Advice appreciated.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion