Results 1 to 2 of 2
-
08-02-2020, 12:03 PM #1
- Join Date
- Jul 2020
- Posts
- 3
Issues with print NOT sticking the supports - Kelant S400s Printer
Hey Folks
I'm new to printing. Just purchased a Kelant s400s printer and am using anycubic clear 405 resin. The problem that I am having is the print will not adhere to the supports. The supports look fine but the print looks like it is sticking to the fep. I was sure to clean the vat good, even applied ptfe to it to see if that was the issue. This print is by far the best so far as I can see some of the part of the first layer of the print after I increased. I had issues with the recent version of chitubox only shadowing the part, so I am running the 1.5 version of chitubox that seems stable.
Can you take a look at my settings and see what changes I need to make.
Many thanks in advance.
-
08-02-2020, 12:06 PM #2
- Join Date
- Jul 2020
- Posts
- 3
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help