Close



Results 1 to 3 of 3
  1. #1

    CURA adds 0.04mm layer height to Gcode ??!

    Hi i just got an ender 3 and start printing but i couldn't help but notice the CURA ALWAYS adds 0.04mm height on Gcode.
    For example if i set the "Layer Height" to 0.1mm CURA will increase the Z steps by 0.14mm on Gcode. If i set it to 0.15mm CURA will increase them by 0.19mm (Disabling the "Z hop when retracted" will make it easier to see)
    Does anyone knows why and how can i fix that ? (Other than set the Layer Height -0.04mm of what i want to print)
    Last edited by FME; 08-12-2019 at 04:37 AM.

  2. #2
    Well first this thread should been in 3D Printing Slicer Discussion

    And second i was wrong it only adds 0.04mm when "dynamic quality" profile is selected.
    Probably that depends on the 3d model that it prints.

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    so don't choose dynamic quality :-)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •