Results 1 to 6 of 6
Thread: Is this common for people??
-
08-17-2018, 06:24 PM #1
- Join Date
- Aug 2018
- Posts
- 6
Is this common for people??
so my hotend protection is getting offand i know i cant turn on like this situation please let me know how can i fix without taking all apartcan i use shrink warp ?? will it get over hot??Thanks pro's helping nooby me very appriciate
-
08-18-2018, 10:03 AM #2
This is why they are call consumables, they wear out and need to be replaced.
-
08-24-2018, 10:04 AM #3
- Join Date
- Aug 2018
- Posts
- 18
that wire seems to have no protection at all, that is just the normal isolation. my printer has same wire, but has 2 layers of heat protection over the wire near the extruder.
-
08-24-2018, 01:10 PM #4
Some hot-end heaters are just better made.
My hot-end heater is similar though you can see they are a different as night and day
TL-W3M 3.jpg
-
08-25-2018, 04:04 PM #5
You could also update the hot-end heater block to something like this. Then use longer Nozzles.
https://www.ebay.com/itm/5PCS-V6-Vol...k/292558254278
-
08-31-2018, 05:21 PM #6
- Join Date
- Aug 2018
- Posts
- 6
Thank you guys even thought i already fixx
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help