Results 1 to 3 of 3
Thread: Slic3r 1.0.0RC2
-
01-02-2014, 01:41 AM #1
Last edited by Mcbride19; 01-02-2014 at 01:44 AM.
-
02-16-2014, 10:04 AM #2
- Join Date
- Sep 2013
- Location
- New Jersey, USA
- Posts
- 494
Version 1.0.0RC3 was just released this morning for Slic3r. There are several major bug fixes in this released. Here is the complete list of fixes:
Bugfixes:
- facets were completely reversed because of an overflow triggered by STL files with very large coordinates
- rectilinear infill was exceeding perimeters when using very low layer height
- random lack of infill caused by recent changes aimed at reducing memory usage
- incorrect number of raft layers was geenrated when too few were requested
- fatal error in the rare case that a bridge has no valid anchor points
- fatal error when concentric infill generated too tight loops
- spiral vase generated some wrong layers
- when processing with fill_density = 0, top/bottom solid shells were missing regions thinner than three times the extrusion width
- the M73 command used with makerware/sailfish G-code flavor exceeded 100% under certain circumstances
Download here: http://slic3r.org/download
-
02-17-2014, 03:52 AM #3
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery