Results 11 to 14 of 14
Thread: Weird alignment at end of print
-
01-15-2015, 09:00 PM #11
- Join Date
- Jan 2015
- Posts
- 47
In the setup manual it told me to use a feedrate of 60 and a travel feedrate of 80. Acceleration is also turned on on the printer itself. Are the other speed settings that I should be aware of?
-
01-15-2015, 09:37 PM #12
-
01-16-2015, 06:59 AM #13
- Join Date
- Jan 2015
- Posts
- 47
I think you saw on the google forum that I am getting successful prints if I lower it to 50 and 70. I'll try 60 and 60 and see what happens. The key print was failing consistently before, so you'll hear back shortly.
-
01-19-2015, 05:12 PM #14
- Join Date
- Jan 2015
- Posts
- 47
I've been a slacker. 60 and 60 also seems to print just fine though! So long as it's not too much detail/high res.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials