Results 1 to 10 of 28
Threaded View
-
01-14-2015, 08:51 AM #7
- Join Date
- Nov 2014
- Posts
- 58
thanks for the info! ill try bumping up my extruder temp . in addition im having very good bed adhesion with an PEI sheet over my glass . it sticks so well that you can not even take off the printed part until it cools below 60c . and the best part is you dont need to add anything . no spray , slurry or tape .
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials