Results 1 to 6 of 6
Hybrid View
-
01-11-2015, 02:27 PM #1
- Join Date
- Oct 2013
- Location
- Honolulu, HI
- Posts
- 199
Hi, This looks like a standard Prusa i3 design so any set of i3 instructions should help. Google it and you should get several sets that will get you most of the way. The choice of a bowden setup is a bit non-standard for an i3 but there is plenty of info on it out there as well. Here is a link to the reprap wiki - http://reprap.org/wiki/Prusa_i3_Build_Manual
There are also some links on there to other i3 resources.
Cheers,
KDog
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help