Printing things with a large base has been no issue for me yet, but I cant seem to print things with a small base, even with a raft. I'm new to 3d printing, and I can't seem to findout why its doing this. Currently I'm printing at 50mm/s and 80mm/s travel. 230 extruder temp, 112 bed temp. I've tried faster movement, 80mm/s for both feed and travel. I tried playing with the bed temp as well, moving it up to 115 and 120, both with the same result.


https://drive.google.com/file/d/0B_O...ew?usp=sharing
https://drive.google.com/file/d/0B_O...ew?usp=sharing


The extruder ends up catching the build up and pulling the print off the board.