Originally Posted by old man emu C'est mangnifique, mon ami. Old Man Emu Thank you. Step 1 : Create the outlay Cab5.jpg Step 2 : Create sections along the profile. Cab6.jpg Step 3 : Connect all the loose ends of the sections to create a second guide. Cab2.jpg Step 4 : Multi section surface Cab7.jpg
Last edited by LambdaFF; 12-27-2014 at 04:47 AM.
Forum Rules
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help