Results 1 to 8 of 8
Thread: ABS or Not?
Hybrid View
-
12-12-2014, 12:07 PM #1
- Join Date
- Oct 2014
- Posts
- 4
Presumably if it was pure ABS then it would dissolve in acetone. The fact that it doesn't implies that it isn't. Even if it contained a lot of recycled ABS i would still expect it to be soluble in acetone. Also it means that I can't make a slurry to use as a glue - not a major problem as superglue worked OK
-
12-17-2014, 01:03 PM #2
- Join Date
- Dec 2014
- Posts
- 40
Did you get pure acetone? I only ask because I bought nailpolish remover at Walgreens originally and had the same problem, but when I bought pure acetone from Home Depot it dissolved fine.
-
12-17-2014, 09:13 PM #3
That's a good point. I was using nail polish remover from the pharmacy at the grocery store. I need to go to Home Depot tomorrow, so I'll pick up some pure acetone there and see the difference...
-
12-18-2014, 04:44 AM #4
- Join Date
- Oct 2014
- Posts
- 4
I was using pure acetone that I bought from a pharmacy. The other ABS filaments that I have (white and blue) dissolve ok but this yellow one seems to be acompletely different animal although i am having no trouble at all printing with it
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help