Results 1 to 10 of 51
Thread: Workbench: Let's See Your Setup
Hybrid View
-
12-08-2014, 11:37 PM #1
- Join Date
- Dec 2014
- Location
- Portland OR
- Posts
- 43
We are running 2 Replicator 2's one above the other on a metal rack.
The best part is... that the older machine (with 1,000 hours on it) runs better than the newer machine, go figure. Thanks MBI
Below those is about 30 pounds of PLA plastic, with the final holes in our rainbow (teal and brown) arriving soon.
20141208_213343.jpg
This is probably shameless self promotion, but check us out at www.artforcestudios.com
..and yes that's a creeper.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion