Results 1 to 10 of 23
Hybrid View
-
12-02-2014, 08:56 PM #1
- Join Date
- Dec 2014
- Posts
- 1
It’s awful. The knots may be caused by the filament supplier’s poor coiling.
-
12-03-2014, 01:23 AM #2
- Join Date
- Dec 2014
- Posts
- 11
Actually it is not an inextricable knot. When I cut out that part, the spool still pulled easily. It’s just that knot which stopped the pulling.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion