Quote Originally Posted by TopJimmyCooks View Post
I hate it when people ask for updates on something that just came out - However, something to consider for the future: A lot of the flexible and exotic filament users are recommending PTFE liners in the extruders. In the extruder block you have a longer filament pathway than many greg's type designs. Doing a version with a wider filament pathway and a little retainer shelf at the bottom for that might be something to look at later. If it's found to be needed. I don't know if any the flexible filaments can print into useful parts like washers, light duty valve seats, gaskets, grommets, etc. But if they do I will be using them.
Don't worry. It's just a part of the development process. Every design undergoes (or should undergo) iteration after first contact with users. I'm already planning on doing a flexible filament version with PTFE liners and perhaps a simplified version with just the extruder for people who want to try other hot ends or don't want to deal with all the options.