Results 1 to 10 of 15
Thread: Test print
Hybrid View
-
12-03-2014, 11:09 AM #1
A great start when new to 3D printing is PLA. I recommend no raft, no supports, and PLA as the way to go until you get confident enough to move on. I have been 3D printing for 2 years and never use a raft. If you need more surface adhesion on a segment of your model just draw some 20 mm dia. pucks that are the same thickness as your first layer and trim them off with side cutters.
I believe this user (Flyboy) has a printer with eccentric pulleys which is partly to blame for the quality.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion