wanted to share something i modeled and printed recently. this was done in all abs. it was too big to be printed on my m2 in one shot so i had split the model in two, printed it then solvent bonded the pieces together. i do alot of automotive painting and airbrushing so i decided to put a nice finish on this piece. i rough sanded it smooth then did a few coats of a high build urethane primer on it. i sanded it smooth. i mixed a light bronze shade of basecoat then took an airbrush and distressed. once it was all done i mixed up some matte automotive clearcoat and put 2 coats on it.

http://www.thingiverse.com/thing:178538

IMG_2288.jpgIMG_2289.jpgIMG_2287.jpg