Results 1 to 10 of 10
Thread: Hotend leaking issues
Hybrid View
-
12-16-2013, 08:20 PM #1
First thing that comes to mind is you need to lower the temperature of your hotend. Not all filaments and colours run at the same settings.
I, personally, have tuned mine down until it stopped seeping at all and then set it to about 5C higher. You might get a slow seepage but this helps to stop the hotend from clogging up.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials