heads not level - thoughts please :-)

[Mjolinor]

Good drawings of the ins and outs from Google groups.

The first is (I think) what you want. The second is similar to what I now have but my PTFE tube stops about 20 mm up. My original heat tubes had no PTFE and had no thread at the top. I made my heat tubes from 6mm stainless threaded bar so I had threads all the way up instead of it being plain where it went into the aluminium mount so I now have nuts top and bottom like picture 3.

Simple hotend.jpgSimple hotend2.jpgHB_TB_003.jpg