Results 1 to 10 of 19
Hybrid View
-
12-15-2014, 05:28 PM #1
Some more of our prints:
1. Carabiner carabiner-sm.jpg
2. Tablet stand: nexus7stand-sm.jpg
3. Tablet stand(big): note10(1)stand-2-sm.jpg
There are other items we are printing for our shop online.
-
01-25-2015, 06:43 PM #2
- Join Date
- Jan 2015
- Location
- Austria
- Posts
- 19
stackable spool holder for my 1kg spools which are too large for the Replicator 2X backside holders
useful as I don't like the spools in the back of the printer where it gets quite hot and hard to reach for quick switching of spools
skateboard ball bearings and 8mm aluminium axle does the job
or I could just stick a pen through the cardboard box of the spool to achive the same result... but that's boring
-
01-26-2015, 10:10 AM #3
- Join Date
- Dec 2013
- Location
- Chiloquin Oregon
- Posts
- 36
I like both solutions! Very clever. Russ
-
01-28-2015, 11:41 AM #4
- Join Date
- Jan 2015
- Location
- Austria
- Posts
- 19
thanks
I just got my aluminium rods and finished the first box
size adapter for this spool (1kg ABS from NuNus)
I also replaced the filament guide tube with longer ones which are hold in place by this piece that fits in the same spot where the original spool holders were
-
02-13-2018, 05:25 PM #5
- Join Date
- Feb 2018
- Posts
- 1
1_DriveStepper.jpg
We use a MakerBot Replicator to print 6 vital components on our SirMixABot robotic bartender. Aside from the drive belt stepper motor (above) the 3D printed parts include a circuit board mount, rail guide/vertical stepper holder, and a belt tensioner. See a few more photos below, and let us know what you think!
2_LowerRailHolderJPEG.jpg
1_FlexCoupling.jpg
1_UpperRailGuideSQUARE.jpg
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help