Results 1 to 10 of 14
Hybrid View
-
10-01-2014, 12:12 PM #1
- Join Date
- Jun 2014
- Location
- Dearborn, MI
- Posts
- 23
I accomplished the same result with my 10" also....but instead of cutting the corners myself, I made a cardboard template of the heat bed with the corners cut diagonally to make room for the screws. Took the template to the hardware store and they made me two pieces of glass per the template for $4.00. I would say wait until you get the kit, measure the heat bed yourself, then decide your approach before having glass cut....you will spend 2 days or so putting the kit together so the glass will not be needed immediately.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help