Results 21 to 25 of 25
Thread: [Work In Progress] T-rex skull
Hybrid View
-
09-03-2017, 09:32 AM #1
- Join Date
- Sep 2017
- Posts
- 4
The link for the Print settings (temp/speed/fill)
-
09-03-2017, 12:46 PM #2
just print it with whatever you like.
As I remember I think i printed the t rex skull at 0.3 layer height and it came out fine. Hel, bacj teh I thibk I even printed it in abs on an open frame printer.
It's a pretty forgiving model. https://www.thingiverse.com/thing:308335
-
09-04-2017, 10:45 AM #3
- Join Date
- Sep 2017
- Posts
- 4
Its not about getting the job printed, its about getting the amazing quality he got. I'm trying to print a totally different model on a Flashforge, an I want an as-built surface finish similar to what he got. It would save me a few dial-in runs if I had a good starting point. Usually I don't aim for that type of surface quality so I don't have settings figured out yet.
-
09-06-2017, 07:34 AM #4
He sanded and painted it.
That finish is not 3d printed :-)
Print it at 0.1mm layer height. It'll take a helluva long time but be very good quality finish.
If you actually read the thread - all settings, temps etc are mentioned.
-
09-07-2017, 12:14 PM #5
- Join Date
- Sep 2017
- Posts
- 4
Please explain to me how to...
Today, 07:24 AM in 3D Printer Parts, Filament & Materials