Results 111 to 118 of 118
Thread: New Matter updates
Hybrid View
-
10-19-2015, 07:57 PM #1
- Join Date
- Dec 2013
- Location
- Georgia
- Posts
- 934
Well, this is just a pickle... Apparently the latest Windows 10 update that installed (without asking, even though I have it set to ask me before installing updates) has put my laptop into a loop of BSODs (crashing straight from the login screen) that only stopped when I disabled wifi and plugged into the wired network connection. Now after that, my MOD-t doesn't find any wifi connections available when searching in the Printer Tool, but I was able to connect to my wifi manually, so now it says it is connected to the wifi in the, but on the store site it consistently says the printer is disconnected.
-
10-20-2015, 11:13 AM #2
I dd say a while back that windows 10 was best avoided. And one of my main reasons was that you have no control of updates.
The best you can do is to disable all updates in a the administrative options section.
Frankly this should be the default setting for ALL versions of windows. No updates, ever !
basically you need to do a system restore to before the update - make sure you are OFFLINE.
Then disable updates (look it up if you're not sure where they've hidden the administrative options section) and THEN reconnect the internet. Otherwise it'll just reinstall the same update.
-
10-20-2015, 09:44 PM #3
- Join Date
- Dec 2013
- Location
- Georgia
- Posts
- 934
Well, I've finally finished out my free half-kilo of SUPER FREAKING PINK filament, unfortunately I wasn't paying attention at the end of the spool and I got to experience clearing out my first jam...
Long story short, it was a heck of a lot easier than with a Makerbot, the hot end unplugs from the head unit and simply unscrews (they even have an instructional video on youtube for it) after that it's a simple matter of plugging it back in, heating it back up while unscrewed and pushing the filament the rest of the way through (with proper protective gear, of course) The whole process took about 5 minutes.
-
10-30-2015, 09:38 AM #4
- Join Date
- Oct 2015
- Posts
- 2
Well, you specifically asked about sound, and I didn't include the sound, and it's sped up 8x, but here's something: https://youtu.be/K1uD0gRSx0Y
-
10-30-2015, 06:00 PM #5
- Join Date
- May 2014
- Posts
- 16
-
10-28-2015, 09:33 PM #6
- Join Date
- Oct 2015
- Posts
- 2
Ditto! Your early users really need this. I attempted to print the 2-sided pumpkin from the store, and after something like 18 hours, it appears to have simply stopped. Is that something that's likely to be fixed? What about the wifi problems? Are they fixed?
-
10-29-2015, 12:15 PM #7
- Join Date
- Mar 2015
- Location
- California
- Posts
- 10
-
10-30-2015, 01:02 PM #8
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials