Results 1 to 2 of 2
Hybrid View
-
09-22-2014, 03:49 AM #1
This could go all the way back to the set up of your Printrboard board, which has the firmware installed on it. Look at http://reprap.org/wiki/Printrboard
Note: Refer to the board as Printrboard which is spelled without the 'e'.
OMELast edited by old man emu; 09-22-2014 at 03:55 AM.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials