Using a Raspberry Pi + Octopi to manage your printer

[AbuMaia]

I did that with the second card. It had two partitions, so I deleted them and made one that used the whole disk, then flashed the image to it. Didn't work. About 20% into the new download now, so I'll try again in the morning. I run Ubuntu Linux on my computer, so the Formatter won't work for me. (It will under WINE, but I don't want to trust something like this to a program running under an emulator)

Edit: I got it working. The SD card device name was something like mmcblk0. The disk utility I was using kept installing the image to mmcblk0p1, or to the partition. I used a command-line command to do it to mmcblk0 instead, and it was mountable, and booted up properly in the raspi. I finally got wifi working on it, so I'm about to hook it up to the printer and send the first gcode through it.