Results 1 to 2 of 2
Threaded View
-
07-02-2024, 01:00 PM #2
- Join Date
- May 2020
- Posts
- 678
Problems with filament not sticking to the bed are usually because the nozzle is too far from the bed for the first layer or a bed that needs cleaning.
Suggest you look at some of the numerous videos on Youtube about getting a good first layer and setting the 'Z' offset.
Try just using the start and end G-codes that are in the printer profile.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials