Results 1 to 8 of 8
Threaded View
-
06-12-2024, 04:01 AM #4
- Join Date
- May 2020
- Posts
- 678
Where you place your files on the bed in the slicer will determine where the printer prints.
The 'Z' offset slicer setting is just to tune the first layer and is separate to and not to be confused with the 'Z' settings when leveling the bed.
Some printers let you adjust the offset on the fly.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials