Results 1 to 7 of 7
Thread: New member with print issue
Threaded View
-
06-11-2024, 08:06 AM #4
- Join Date
- May 2020
- Posts
- 674
Suggestions............
Bowden tube deteriorated at the hot end and not sealing properly or perhaps a partially clogged nozzle.
Try a different PLA, I recall seeing somewhere on Youtube that silk Pla comes with its own quirks as regards settings.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials