Results 1 to 6 of 6
Threaded View
-
05-27-2024, 01:15 AM #6
- Join Date
- May 2020
- Posts
- 678
During a print, the 'Z' offset icon is on the information screen with all the temperature,speed and light icons etc. The option is not available until a print has been started.
Not to be confused with the initial 'Z' setting when leveling the bed, the 'Z' offset only affects the first layer.
Loads of Youtube videos on setting a first layer down.Last edited by Bikeracer2020; 05-27-2024 at 01:21 AM.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials