Results 1 to 6 of 6
Threaded View
-
05-26-2024, 09:50 PM #5
- Join Date
- May 2024
- Posts
- 3
Thank you for the reply Bikeracer. Yes the X Plus 3 does have the Z offset option through the touch screen interface. When I set the printer up I used the calibration card as instructed until the print head "grabbed" the card and set my zero. When I get it back up and running I will take a look at the Z offset.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials