Results 1 to 2 of 2
Threaded View
-
03-03-2024, 02:14 AM #2
- Join Date
- May 2020
- Posts
- 667
Could be the nozzle is too close to the bed.....perhaps adjust the "z" offset in +0.02 increments.
Print a bed leveling test to check.
Clean extruder filament gear teeth for ground filament.
Perhaps fit a new nozzle.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery