Results 1 to 2 of 2
Hybrid View
-
03-03-2024, 02:14 AM #1
- Join Date
- May 2020
- Posts
- 678
Could be the nozzle is too close to the bed.....perhaps adjust the "z" offset in +0.02 increments.
Print a bed leveling test to check.
Clean extruder filament gear teeth for ground filament.
Perhaps fit a new nozzle.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials