Results 1 to 6 of 6
Thread: A little help with first layer
Threaded View
-
02-28-2024, 03:28 AM #1
- Join Date
- Jan 2024
- Posts
- 16
A little help with first layer
I have never had solid first layer performance. I have had some reasonable success, but I always feel like the finished product pops off a bit too easy. Now that I have a print that has several holes, I feel like I'm pushing it pretty hard. All of these fine details dont like to stick well. I upped bed temp from 55 to 60, but I still have some questionable looks here. Please have a look and give me some suggestions.Material: PLAFirst layer rate 30mm/secHead 210cbed 60cA couple pictures attached.
Last edited by martinav; 02-28-2024 at 03:30 AM. Reason: more info
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials