Results 1 to 6 of 6
Hybrid View
-
02-08-2024, 06:36 AM #1
- Join Date
- Dec 2023
- Posts
- 1
That tells me, anything larger than a dime is going to print fantastically. I can't wait to test the 0.2mm hotend. I've only had this P1S for 3-days and I'm just blown away after every print I've made so far and all at 'default' settings. Don't get me wrong, I know there are a number of excellent Prusa and other printers that can print this level, but few of them for $900 considering all the other features the Bambu has. I guess I'm still trying to convince myself that I made the right decision and I think with this test print I can stop doubting myself...lol...
-
03-12-2024, 09:21 AM #2
I went through the same thing. I've had my P1S for a month now and it's still blowing my mind. I printed some M4 threaded hex head bolts and the threads worked well. And that was with the .06 hotend. I tried printing an M3 bolt and the threads were kind of mushy but I bet if I were to print an M3 with the .02 head, they would work as well. So, think smaller than a dime for some things. I've completely stopped wondering if I made the right decision. The only thing that would shatter that is if it doesn't hold up to the test of time and hours. But I keep seeing posts of people talking of 1000s of hours without any problems. It will take me a long time to get to 1000s of hours as I'm not manufacturing, I'm just a guy who prints stuff for a client or myself on occasion. I couldn't be more thrilled with this printer.
Bambu P1S/AMS
NVision4D http://nvision4d.com
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion